Ask Experts Questions for FREE Help !
Ask
    jjarmstrong's Avatar
    jjarmstrong Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 21, 2009, 11:41 AM
    Removing mower blade
    I know that a nut/bolt typically loosens counter clockwise. Is this true with a mower blade bolt on a walk behind push lawn mower? Or is it threaded backwards?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Mar 21, 2009, 12:41 PM

    It's usually lefty-loosy righty-tighty. There is some info for removing mower blades in the sticky in this section.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman mower stopped moving but blade engagement still works and mower starts [ 7 Answers ]

Can someone help me determine why my craftsman kohler engine 16hp manuel transmission riding lawnmower stopped being able to move but still is able to turn on/off and engage the mower blade? I have checked the clutch but it appears to work since the mower is able to be turned on/off. All of the...

Removing riding mower blade [ 4 Answers ]

I am unable to remove my mower blade on my craftsman riding mower LT1000. I removed the top nut but I am unsure if I knock down the shaft with a hammer or take it off another way please help so I can sharpen my mower blades. Thank you mike

Removing the cutting blade [ 2 Answers ]

I have a Yard machine riding lawn mower.Can some body tell me how to take the cutting blade out for me so I can sharpen them.

Removing a blade from a Craftsman Lawnmower... [ 4 Answers ]

Okay I am trying to tighten up the blade on a Craftsman electric lawnmower my neighbor threw out. It still works, but the blade will not tighten up. I have tried to hold the blade and loosen, held the spinning mechanism the blade sits on, I have jammed screwdriver up into the bottom of the mower...

View more questions Search