Ask Experts Questions for FREE Help !
Ask
    dougp52's Avatar
    dougp52 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 17, 2009, 11:35 AM
    Installation of panels
    Now that I have replaced the filter on my Carrier WeatherMaker 8000 I need to replace the two panels.. but I forgot. Does the panel with the vents go on the top or bottom?
    Signed,
    Mr. forgetfull ):
    EPMiller's Avatar
    EPMiller Posts: 624, Reputation: 37
    Senior Member
    		  
    #2

    Mar 17, 2009, 05:18 PM

    Are they identical in size? If not, there is your clue. If they are, the vented panel does NOT go on the section with the blower. The sections with air movement must be completely sealed.

    EPM
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #3

    Mar 18, 2009, 09:15 PM
    Can`t sat that I`ve ever seen a furnace that both doors were exactly the same size,this is done so as the right door only fits where it should go
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #4

    Mar 19, 2009, 04:01 AM
    I have come across a few that were reversed by the homeowner. Guess what? The draft safeguard was tripped and they had no heat. Right on EP.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Installation of glass panels and door on glass tiles [ 1 Answers ]

I have installed 6"x12" glass tiles for my shower room. The glass people came and installed the frameless glass panels and doors for the shower. They had no problem drilling holes for the hinges, but after they installed the panel and door, some of the glass tiles around the hinges started to crack...

200 amp and 125 amp panels [ 11 Answers ]

Have 400 amp service, need to supply power to 2 office trailers. 1 trailer is 200 amp panel 1 trailer is 125 amp panel I want to install 200 amp panel with meter to feed the 125 amp panel so we can track usage on it. How should I connect these panels. Can I run my main service lines...

Sub panels [ 2 Answers ]

When installing a sub panel in a single family dwelling coming off a main panel do you size your wire as a feeder according to 310.15 (b) (6) or do you size it as a branch circuit?

2 200 amp panels [ 1 Answers ]

Can you install 2 200 amp panels off 1 meter? I have 1 200 amp panel and putting on addition on with another 200 amp panel. Can it be done with out putting a 400 amp panel in? Thanks

View more questions Search