Ask Experts Questions for FREE Help !
Ask
    cosmo1945's Avatar
    cosmo1945 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 15, 2009, 09:58 AM
    Myself propelled troybilt mower
    :mad:My 21" self propelled honda powered mower's wheels turn with no load but stop propelling the mower when in use- have installed new belt and checked pulleys- what else could be wrong?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Mar 15, 2009, 07:58 PM

    Did you use an OEM belt and confirmed the numbers are correct?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #3

    Mar 15, 2009, 08:06 PM

    Not sure about that mower, but Troy Builts are picky about the clearances on the friction drive. Watch bearing wear on the friction disc clutch if it has one.
    cosmo1945's Avatar
    cosmo1945 Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Mar 15, 2009, 08:13 PM
    Yes I used an OE belt from Troy Bilt by part #
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Drive cable on Troybilt self propelled lawn mower [ 1 Answers ]

I have a 21" 7hp troybilt mower and am trying to replace the drive cable. The old one broke off underneath the deck where it attached to the deck. The problem I have is getting my fat fingers in there to thread the new cable in and hook it up to the bracket on the underside of the deck. Still...

Troybilt Lawn mower [ 1 Answers ]

I have a Troybilt riding lawnmower. There is nothing when I turn the key . The battery has been charged. Should their beagroundwire between the cutting deck and the mower? I is three years old, model 1846.

Troybilt riding mower [ 1 Answers ]

How much oil does a troybilt riding mower hold? 17.5 HP

View more questions Search