| 
 
 
 
 
  Not your question?
  Ask your question
  View similar questions
   
 Add your answer here.Check out some similar questions!
Use conduit and what type?
 [ 6 Answers ]
 I am building a 40X50 metal building to use as a workshop and storage. I have calculated that I need at least 70 amps so am planning on going with a 100A load center. I will us #12and 20 amp breakers. My question is regarding the wiring. I am assuming I should use conduit instead of running romex.... 
Above ground conduit
 [ 9 Answers ]
 My neighbor is running an above ground electrical conduit with 110 directly on the property line. He has an inground pool that is 5 feet from this same property line and therefore 5' from the above ground conduit. I live in California and do not see this as safe. It seems to me that an above... 
Weeping conduit ?
 [ 11 Answers ]
 ( greenhorn alert) HI I was on the last of 1" pvc . Burying them 18'' deep on the way to the shed. for a 80foot run. so i can add my 4 #12 thwn.wires, Now I heard someone mention about water condensation, and that all conduit has water in them,and that you need to add weeping holes ,to keep... 
Do I need conduit?
 [ 4 Answers ]
 I have a panel in my garage for my garage based workshop. I want to run a 220 volt circuit (have have the capacity in the panel to do so). My question is whether I need to run the wire inside conduit or can I run romex without conduit. The wire will be behind drywall the entire way so it will... 
Electrical conduit
 [ 1 Answers ]
 I am running a new exterior line to a carport to install two fluorescent lights in the ceiling of a "V" shaped aluminum 2 car carport. The underside of the carport reaches very hot temperatures during the summer months, metal parts are burning hot to the touch. I undersatnd I need to use exterior... View more questions Search 
 |