Ask Experts Questions for FREE Help !
Ask
    gwalk007's Avatar
    gwalk007 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 8, 2009, 03:41 PM
    Refrigerator water line obtained a hole.
    Afternoon,
    My refrigerator water line has a small hole in it. I purchased a refrigerator water line kit. In it was a plastic and copper farrow and screw caps. I believe the directions are asking me to put the cap on then the farrow then screw it back on. The only problem is the cap and farrow just slide off from the water pressure. Help.
    mazak's Avatar
    mazak Posts: 148, Reputation: 5
    Junior Member
    		  
    #2

    Mar 8, 2009, 03:47 PM

    Try putting the tubing into the coupling then slide the ferrow down to the coupling then slide the nut down over the farrow and tighten.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hooking up water line to refrigerator for ice maker and water dispenser [ 2 Answers ]

Here is my problem, I just bought a refrigerator that has an ice maker and water dispenser which by the way is a Haier PRCS25. I then purchased an ice maker kit from the hardware which came with a self piercing saddle valve. From here I connected the valve to a 3/4" copper cold line pipe...

Refrigerator Water Line Attached to Something Else [ 4 Answers ]

If I have a water line behind my frig that is not being used, can I use it for something else like the water bowl for my dogs? Is there something in the attachment at the end of the water line that stops it from overflowing or is that fitting inside the refrigerator so that it shuts the water off...

GE Refrigerator - water line [ 1 Answers ]

The line to my water dispenser started to leak so I need to replace the whole line. Most of the line is 1/4" the part that I need to replace is 3/16'. I have tried to find this line and none of the plumbing stores carry it and they tell me it is an odd size. Does anybody know where I can get...

Connecting water line to refrigerator [ 6 Answers ]

I have a GE Profile refrigerator, and the manual is very vague about how to connect the water supply line to it. There is ¼" OD copper tubing coming from the back of the fridge (about 3"), and I have the supply line (¼" OD copper tubing w/ about 48" extra coiled up) coming from the basement. How do...

Refrigerator water line noise [ 3 Answers ]

Our house is 5 years old and about a month ago the refrigerator water line started banging between the wall and the refrigerator. It is very loud and you can watch the line jump. It happens about when water is turned off in the house, either the sink, toilet or washer. It only happens about 20%...

View more questions Search