220v gfci breaker

arleyman2 Posts: 1, Reputation: 1

New Member

Mar 8, 2009, 04:06 AM

220v gfci breaker

Is there a minimum height that this has yo be installed

stanfortyman Posts: 5,598, Reputation: 279

Electrical & Lighting Expert

Mar 8, 2009, 06:30 AM

Do you mean the enclosure or the breaker itself in an existing panel?

Add your answer here.

Check out some similar questions!

Gfci breaker + outlet in same circuit.breaker tripping [ 4 Answers ]

I have a gfci breaker for a bathroom and there is an additional gfci outlet in the bathroom on the same circuit. The breaker was tripping intermittently over the past week and now will not re-engage. Should I suspect a faulty breaker or is it better to troubleshoot the circuit first? The...

GFCI breaker and outlet [ 13 Answers ]

We recently had a GFCI outlet installed in the back of the house for external use. We also had a GFCI installed in the circuit breaker because of that. When the GFCI on the circuit breaker is in the ON position, the outlet won't work. But when it is set in the OFF position, the outlet works. ...

Replacing GFCI Breaker With A Regular Breaker [ 1 Answers ]

I have a 15 amp circuit serving only a single outlet on my deck. It is protected by a GFCI circuit breaker in the home's single 125 amp service panel. I wish to replace the GFCI breaker with a regular 15 amp GE breaker. I will then protect the circuit with a GFCI outlet. I am familiar with...

Gfci breaker popping [ 8 Answers ]

After installing a second outdoor fan, I tied into an existing fan under an enclosed porch.I decided it would be smart to install a gfci breaker to protect them (vs the standard breaker). The circuit is tied into my kitchen an outdoor spot lights. With all the individual light circuits either...

Gfci breaker [ 2 Answers ]

My question is I have a 50 amp GFCI breaker that I will be installing in the breaker box. I have another 50 amp GFCI breaker box that must be installed within 5 feet away from the hot tub. Is it OK to install both 50 amp GFCI breakers for this hot tub I realize I don't need two GFCI's but I...