Ask Experts Questions for FREE Help !
Ask
    Dunlops's Avatar
    Dunlops Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 7, 2009, 07:14 PM
    Board and batten
    Can someone give me the details on applying board and batten over old brick. I wish to apply the wooden siding on the one story back extension of our 103 year old story and a half home.
    21boat's Avatar
    21boat Posts: 2,441, Reputation: 212
    Ultra Member
     
    #2

    Mar 7, 2009, 07:30 PM

    The cheap way is use exterior ply and stand up installation. Use furring strips to cover ply butt seams, space battens every 12"

    If doing it in ply as "boards" tap con furring strips every 16 oc. on the brick Install ply. Add battens over ply seams and every 12"

    If doing it in pine 1x12s Tap con horizontal furring strips every 16 oc. On the brick Apply 12" boards then battens over the 1x12" boards.

    Not sure of the budget there.

    If you are buying the actual batten and board siding then follow the instructions on the manf package. You will need furring strips no matter what.

    I gave you the first orginials ways batten and board was done.

    Signed 21 Boat

    If I Helped To Answer Your Question Please Rate My Answer

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Green board sheet rock VS cement board for show wall backing [ 3 Answers ]

I was wondering if the green sheet rock will do just as well as cement board for installing in a show that I'm planning on tiling?

Board and batten siding [ 5 Answers ]

I would like to install board and batten siding on my new house. Could I just cover my sheathing with nice plywood and then just add the battens rather than spending a lot on cedar boards?

Board and batten over shingles [ 2 Answers ]

The elevation of my house is covered with roof shingles. There are no problems with the exterior wall or the shingles, except aesthetics. I want to cover the shingles with board and batten on furring strips. Can I do this directly on top of the shingles or should I remove the shingles first?

Board & batten siding [ 2 Answers ]

I'm building a shed with board & batten siding,can I use pressure treated plywood if so what size should I use 1/2,5/8,or3/4" ?

Board and Batten wood Siding [ 1 Answers ]

When installing board and batten wood siding on my garage do I put the rough side of the wood facing the inside or outside of the building Thank-you Brian


View more questions Search