Ask Experts Questions for FREE Help !
Ask
    tormann's Avatar
    tormann Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Mar 4, 2009, 01:07 PM
    Explorer Ball Joints
    Greetings
    I need lower ball joints for my 1997 Ford Explorer, xlt, 6 cyl sohc, Vin 'E'.
    Who makes the best product? Should I replace the upper ball joints at the same time, even if they are not as bad?
    Thanks,
    Jim
    this8384's Avatar
    this8384 Posts: 4,564, Reputation: 485
    Ultra Member
    		  
    #2

    Mar 4, 2009, 01:11 PM

    I think MOOG makes a pretty decent part. I don't know if they sell that in your area. Wherever you go to buy, make sure you buy the higher quality/longer warranty part. With something as important as balljoints, it's not worth saving yourself a few bucks.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #3

    Mar 4, 2009, 01:21 PM

    Go to RockAuto.com and buy the least expensive ball joints that are "Professional Grade." Spicer, for example, makes many for Moog and others, for a fraction of the price. It's best to do both at the same time, but it depends on your wallet, their condition, and how long you plan on keeping the vehicle.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ball joints [ 3 Answers ]

What would an estimated cost of replacing lower ball joints on my 1998 Ford F150? I called a fairly reliable repair shop this morning and they gave me an estimate of approximately $365. This would include labor and the alignment. I looked at NAPA online and found the lower ball joints at a...

Lower Ball Joints Replacing [ 4 Answers ]

:) I own a 1999 Honda Accord 6cyl with 103,000 miles. I went to the dealer for an oil change, and was told that I will need my front lower ball joints replaced at a cost of approx. $400 plus cost for wheel alignment. I called a mechanic in my neighborhood who replaced my timing belt, and he...

$850 for ball joints? [ 4 Answers ]

I was told I need to redo the upper and lower ball joints on the front of my 98 Dakota... does this sound about right for this repair? I know something is wrong because I'm getting some vibration when I drive, especially at high speeds.

View more questions Search