Ask Experts Questions for FREE Help !
Ask
    dlvast's Avatar
    dlvast Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 2, 2009, 07:21 PM
    Can the Honeywell Pro 8000 be intergraded
    With a NetStreams home automation system? Thanks for any and all help. Dl
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Mar 2, 2009, 08:02 PM

    The Vision Pro 8000 series. All of the literature suggests not. It's not a communicating thermostat.

    One model sort of is. It places the tstat and has a communicating link to the relay module at the furnace.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing a Honeywell T8575D2003 with a Honeywell RTH8500. Having trouble with wires [ 1 Answers ]

I'm replacing a Honeywell T8575D2003 with a Honeywell RTH8500. Didn't think there would be issues, manuals are all straight forward. However when I removed the T8575, the wiring set up did not match what the RTH8500 was expecting. The T8575 has 8 wires connected as follows < 1 ...

Trouble with Honeywell VisonPRO 8000 [ 7 Answers ]

Hi, I recently purchased two Honeywell VisonPRO 8000 - TH832U1008 to replace my Honeywell FocusPRO 5000 - TH5220D1003 because I wanted programmable thermostats. After swapping over the connections, the heat function will not work. I can turn on the fan manually, and the cool function works. Outside...

Honeywell Vision Pro 8000 TH8320 wiring [ 8 Answers ]

Hello, I have a 2-stage heat, one stage cool heat pump. I am trying to wire this thermostat but it is not working. I called a professional and she told me to wire it as follows, but the heat will never kick on no matter how long I wait. Left Side Heat Pump Y2-No wire L-No wire E-No wire...

Honeywell thermostat pro 8000, Why remove jumper wire? [ 2 Answers ]

I'm trying to install a HoneyWell digital thermostat Pro 8000, part number TH8320U108 for my Rudd and Rheem heating and a/c system. The Rudd Furnace is a plain Silhouette and the Rheem a/c is a model 3765SA17. All of the wiring hook up points from the old Honeywell thermostat match the new...

Honeywell VisionPRO 8000 Installation [ 5 Answers ]

Hi Everyone! We just finished building our new home and didn't think about thermostats along the way. There is a simple digital thermostat installed at this time but we wanted a programmable one. I attempted to install it today but the compressor wouldn't cut on. I've installed thermostats before...

View more questions Search