Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Help with wiring a HUNTER Ceiling Fan and Light Control
[ 16 Answers ]
I am currently replacing a light switch with a ceiling fan and light control. The description of what I am replacing with is: http://www.littmanbros.com/pd_hunter_27182.cfm I currently have a ceiling fan with a light kit (and it too high off the ground to have the fan controlled by a pull...
Remote control on ceiling fan with a fluorescent light
[ 4 Answers ]
I purchase a Home Depot ceiling fan with a fluorescent light. I bought a remote control for the fan but it cannot control the fluorescent light. Any thoughts on how I may reconfigure the wiring to use the remote? Thanks, Dan
Remote control for ceiling fan/light
[ 6 Answers ]
I am replacing the remote control unit for a ceiling fan with light fixture. The fixture is located in a stairway landing and is controlled by a three-way switches. The fan is a Hunter fan, however, the remote control/sensor is not a Hunter. The remote control unit is made by Dimango Products...
Ceiling fan light control
[ 2 Answers ]
I just bought and installed a new Hunter fan to replace an old fan. I also bought a compatible 3-wire wall switch. The fan is up and works. Upon reading the directions for the wall switch, it says "if one wall switch currently supplies power to both fan and light, additional wiring will be...
Remote Control Light and Ceiling Fan
[ 3 Answers ]
Hello All, I have just had two Omega Casablanca remote control Ceiling and Light fans fitted. My question I have noticed that when I use my microwave oven this will turn on the light or fan on these units, is this normal and how can I rectify the problem. Thanking you kindly, sarah 1:confused: View more questions Search
|