Ask Experts Questions for FREE Help !
Ask
    jab93831's Avatar
    jab93831 Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 21, 2009, 01:55 PM
    Kenmore Ultrawash Dishwasher leaves 2" of water
    I just installed a used Kenmore Ultrawash Dishwasher and it won't drain completely. I put a new hose on it, so there's no obstruction. It leaves about 2"+ of water in the bottom of it - does sound like the pump is working okay.
    jrl0222's Avatar
    jrl0222 Posts: 5, Reputation: 1
    New Member
     
    #2

    Feb 21, 2009, 10:22 PM
    You might check the drain/fill float, usually located at the rear of the washer. If the float is bad this would be one reason why water is left.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #3

    Feb 22, 2009, 12:15 AM
    Also check the pump water intake grates/grills to make sure they are clean and open to allow full water flow.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Ultrawash Dishwasher [ 2 Answers ]

I've got a Kenmore Ultawash dishwasher that I'm having problems with. It's about 5 years old, and until recently worked fine. Now whenever I use it the dishes, especially glasses come out dirty, with flecks of stuff glued all over them. I've been practically pre-washing the dishes before I put them...

Kenmore Ultrawash dishwasher [ 1 Answers ]

I have a Kenmore Ultrawash dishwasher. It is probably about 5 years old. It works fine, but at the end of the cycle the bottom is full of water. What could the problem be?

Kenmore ultrawash dishwasher sprayer fell off [ 1 Answers ]

Top sprayer fell of kenmore ultra wash dishwasher. How does it go back on?


View more questions Search