Ask Experts Questions for FREE Help !
Ask
    Jpizy11's Avatar
    Jpizy11 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 19, 2009, 09:25 PM
    1999 Ford Tauras
    I have a 1999 Ford Tauras and the transmission is not shifting into any gears. It started shiftinh hard in all forward gears and tonight it just stopped all engagement. Any thoughts or inputs. Im a bit stumped. :mad:
    this8384's Avatar
    this8384 Posts: 4,564, Reputation: 485
    Ultra Member
    		  
    #2

    Feb 20, 2009, 08:31 AM

    You can try to see if there are any codes stored in the computer, but it sounds like you need a new transmission. Mid-tolate '90s Tauruses are known for having bad ones to begin with.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1999 Ford Superduty [ 1 Answers ]

How do you change glow plugs on a 1999 Ford Superduty.

1999 Ford Taurus [ 4 Answers ]

I just bought a 1999 Ford Taurus, and when I start the car up the low coolant light comes on. I looked at the coolant reservoir and it is full. So we drove the car home, which was less then 2 miles, and the car ran fine, just this light stayed on. And the Temp of the car didn't start to warm up...

99 ford tauras er loose won't change gears [ 1 Answers ]

I have a 1999 Ford Tauras that I drove and when I stopped and put it in park, it would not go into park. I think it may be a shifter linkage to the transmission?? Does anyone know what this might cost me?

1999 Ford Taurus [ 3 Answers ]

I have a 1999 Ford Taurus V6 Vulcan, and I just installed a car stereo or car deck and when I flip the ignition backwards or key the car stereo does not turn on and I would like to know what's going on, its not any fuses cause I looked at them. Can anyone help me out here thanks. THanks

Ford Mondeo 1999 [ 1 Answers ]

Hi all, Hope some one can help. My rear brake pipes are slightly corroded and require changing. Has anyone got experience in this and a diagram would be useful. Hope some one can help

View more questions Search