 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Rent a power auger to ream the drain line. You can also try chemical drain cleaners or a simple hand auger (also called a snake) but the final answer is the power auger. If you call a plumber, this is the tool he will use. You can do it yourself and the rental fee is much cheaper than the plumber bill.
|
||||
Not your question?
Ask your question
View similar questions
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Drain pipe for washer backing up once washer starts to empty what could be causing
[ 4 Answers ]
What couild be causing the drain pipe fro washer to back up and spill all over floor behind washer
Maytag Washer doesn't entirely drain when spinning?
[ 3 Answers ]
I just replaced my Maytag washer's motor, pump, and belt. The pump had a piece of debris in it and it seized up. This caused the motor to burn out. Anyway, now that it is all back together the washer will not entirely drain the clothes when it goes through a cycle. You can pull out the...
Maytag washer: drain pipe overflows during rinse cycle HELP!
[ 2 Answers ]
:eek: I have a new Maytag washer. (top load). During the drain cycle I hear the water pumping out but then the water comes back and will overflow at the top of the pipe and on the floor. The old washer did not have this problem. We used a snake, draino etc etc. in the pipe. Sometimes it will NOT...
View more questions Search
|
