Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Shower arm leaks at brass fitting
[ 3 Answers ]
I have tried teflon tape and joint compound on the new shower arm I installed and there is still a small leak. What options do I have to correct this problem? Can I epoxy the joint, can it be soldered? Thanks!
Brass Shower Stem Not able to remove
[ 2 Answers ]
Hi Everyone, I have a leaky tub/shower faucet. I'm trying to replace the washers/orings, but I can't seem to get the inner brass stem bonnet nut off. I've bought the 5 piece stem socket tools, but none seem to fit. One comes close to fitting, but when I try to get leverage on it, it slips....
2" brass shower drain
[ 1 Answers ]
Is there a tool that can take a 2" shower drain out without cutting the trap out? Stephen
Change brass fitting on 1" HDPE water service to house
[ 4 Answers ]
I have 1" HDPE water service into the house, Vanguard Proguard black plastic. Presently there is 3/4" brass nipple inside, held on by two hose clamps. To this is threaded a 3/4" valve followed by 3/4" PEX supply to the house. I want to change the 3/4" nipple to a 1" barbed fitting to restore...
Shower stem
[ 3 Answers ]
How do I get a stem out or a shower that is stuck? View more questions Search
|