Ask Experts Questions for FREE Help !
Ask
    Appdumb's Avatar
    Appdumb Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 11, 2009, 04:27 PM
    Kenmore HE3t feels with water when not used
    Have a 4 year old Kenmore HE3t front end washer that will fill with a couple of inches of water when it is not being used. It appears to happen if the door is left open. Any ideas what may be going on?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 11, 2009, 06:06 PM
    It could be a defective water fill valve or it could also be that all the water is not draining out on the final spin cycle. After the next time you use the machine turn off the water supply both hot and cold and see if it fills. If it does it is probably the water fill valve.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore he3t washer [ 1 Answers ]

I have a kenmore elite he3t front load washer. I am having a problem with error codes of F02, F09, and Sud. Before I took the washer apart I was getting the F02 and Sud errors. After taking the washer apart to clean out the drain hose, I started getting the F09 error, it only happened a couple...

Kenmore Elite HE3t Washer 42922 [ 1 Answers ]

Washer doesn't finish cycle. Stops at rinse and keeps beeping. When paused and started again, rinses for another minute and stops again to keep beeping. While beeping, it flashes minutes left on cycle then an "F" continuously.

HELP my Kenmore Elite HE3t [ 3 Answers ]

Here the problem... I washed a load of clothes changed the loads and now its its is in the control lock . I had what it said... to hold the press&hold button for 3 second to lock or unlock that does not work. I also tried to unplug it and plug it back in. Any help!! :eek:

View more questions Search