 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
3 wire to 4 wire from sub panel to receptacle
I am installing a new stove and running new romex from the box to the stove. How do I properly connect the 4 wires at the box that currently has only 3 wires so that the new system is grounded?
Saw this above and it is similar to my question earlier, with the response being "yes" as to the box meaning the old breaker panel |
||||
|
||||
|
Max, no need to double post.
Keep it all here: https://www.askmehelpdesk.com/electr...le-314780.html |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a new dryer with a 4 prong plug. My old dryer was wired directly. I have a Leviton (Nema 14-30R) "30A - 125/250V GROG" plug receptacle and a junction box and wish to mount it, however, I don't know if there is a specific order for the wires to be hooked up to the actual box. Wires are...
I am trying to connect from a 3 wire system at the utility pole to a 4 wire service panel inside a new mobile home. I called an electrician for some advice and was told that I needed to drive an 8ft ground stake and attach a solid copper wire from the stake to the ground bar in the panel. Then I...
Hello, I have two switches, three wire coming into the box is red black and white. Switch 1 is connected to the red and is connected to the other switch 2 with a small white wire. Switch 2 is connected to the white wire coming in and the black wire. I want to install a receptacle that runs all...
I just moved in and the dryer won't heat. I'm trying to troubleshoot so the first thing I checked is the receptacle it's an old 3-wire. One leg shows ~238V the other shows ~116V is that normal?
View more questions Search
|
