Ask Experts Questions for FREE Help !
Ask
    hlisak's Avatar
    hlisak Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 6, 2009, 11:17 AM
    Oven door handle loose
    I have a Whirlpool self-cleaning stove. The oven door handle is coming loose but I can't find how to tighten it before it falls off. Please help. Thanks,
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 6, 2009, 03:23 PM
    You have to usually remove the door. Then take it apart. Then tighten the handle then reassemble. Sometimes you can do it with the door still on the stove but I usually take it off for the repair.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Loose faucet handle [ 12 Answers ]

We just installed a new Price Fister faucet in our kitchen sink. The lever that turns the water on doesn't stay up unless you hold it (up is on, down is off). We can't lift the handle halfway to get only a little water because the handle falls to the off position immediately. Is there a screw to...

How can I open my oven my locked oven door [ 3 Answers ]

How can I open my locked oven door?

Maytag oven door handle broken [ 1 Answers ]

I have a maytag oven that I accidentally broke the door handle off while trying to move it. It appears to have broken off clean but won't go back tightly into place. Does anybody have any tips? Thanks for any advice.

Loose single faucet handle [ 3 Answers ]

I have a Moen Kitchen faucet that is about 4 years old. Recently, I've noticed when turning on the water by pulling up on the single handle the whole long necked spout lifts and wiggles tremendously. Someone told me to pop out the logo on the faucet and tighten with an allen wrench but that did...

Loose Kitchen Faucet handle [ 4 Answers ]

Hi, I have a single handle kitchen faucet which when I turn on the water, it's loose to the point where sometimes gravity will pull the handle back down into the off position. The securing screw is tight and does not wiggle. The whole mechanism seems fine except for its resistance to stay on....

View more questions Search