Ask Experts Questions for FREE Help !
Ask
    crh908's Avatar
    crh908 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 5, 2009, 09:29 PM
    No power to switch
    I replaced the switch behind he door of my rheem quite 80 furnace. When I opened the switch electricity popped , I don't have a blown fuse in the panel is there an in line fuse somewhere or is it something else.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 5, 2009, 09:42 PM
    I replaced the switch behind he door of my rheem quite 80 furnace. When i opened the switch electicity popped

    Did it pop before or after you replaced the switch? If it poped after you replaced the switch you have a short circuit somewhere. Look for a small automotive switch on the circuit board since that is the only fuse that might be in your unit. You might also try turning completely off then back on the circuit brteaker in your house panel.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

HP Pavilion power switch [ 1 Answers ]

Anyone know of a place where I can get a replacement power switch? I have searched and searched the HP sites and other parts sites and can't locate any information. I'm referring to the front panel switch which illuminates when on. ONn my computer the drive light is part of the assembly.

Can the UPS charge in pluged to power and switch off. [ 1 Answers ]

I have a 500VA UPS. In our area power cut is very high. So to run the computer I installed a big battery in my UPS near about 64ah. In the day time the power shut down. So I use the battery. The power comes in the evening time. My question is that can the UPS charge the batter pluged into the power...

Power switch for Electro Circular Saw [ 2 Answers ]

I need a power switch for an old 12 amp circular saw. It's an Electro Engineering 7.5 inch Model 1222. I think the company is out of business. They were in Chicago at one time. The saw is at least 25 years old. Probably won't find an exact replacement but does anyone know a source of parts like...

Pull power from end of run three way switch? [ 1 Answers ]

I'm not an electrician, but have successfully installed and run wiring for non-complex ceiling fans, so I have some skills. Forgive me if I don't use some of the terms correctly. The current issue I have is related to a three way switch. That three way switch is part of an upstairs/downstairs...

Can I use Power from an existing switch [ 2 Answers ]

Hello all, I'm new to this site. Any help would be greatly appreciated. I'm trying to add a new pendent light in the bathroom between two recessed lights, but I would like it to have it's own switch. I want to avoid destroying the drywall or paint, and I don't mean where I have to cut in a new box....

View more questions Search