Ask Experts Questions for FREE Help !
Ask
    NITRO-BTU's Avatar
    NITRO-BTU Posts: 62, Reputation: 1
    Junior Member
     
    #1

    Feb 5, 2009, 06:30 AM
    BRIGGS Valve Adjustment ?
    Hello People, I have an 18.5HP Briggs twin cylinder Lawn Tractor of 1997 model year.
    I suspect the valves maybe in need of adjustment, but I don't know what the Symptoms would be. After the engine is started it runs fine. Is there some simple way of determining this, and if so, where do I find the "Valve Adjustment Procedure"?
    Thanks, Nitro-btu.
    jsfocke's Avatar
    jsfocke Posts: 310, Reputation: 37
    Full Member
     
    #2

    Feb 5, 2009, 09:54 AM

    You might try this video on "You Tube"

    YouTube - Lawn Mower Repair Valve Adjustment V-Twin
    NITRO-BTU's Avatar
    NITRO-BTU Posts: 62, Reputation: 1
    Junior Member
     
    #3

    Feb 6, 2009, 06:25 AM

    THANKS jsfocke, The video was very informative. I have the Opposed twin... Would you happen to know the setting for the valve lash, or is it the same .004"
    According to the man in the video... Excessive valve lash causes difficult, or hard starting. I don't quite understand that concept, maybe you could explain it. On mine the starter tends to SLOW DOWN, or STOP at the compression cycle [TDC]. Nitro-btu.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Briggs and stratton valve adjustment [ 3 Answers ]

Can any one tell me what the valve adjuctment is on a 17 hp briggs and straton single cylinder engine is

Briggs 16 HP Vanguard valve adjustment [ 1 Answers ]

I have worked on car engines since the 1950's and I'm very familiar with valve adjustments on many car engines. I want to adjust the valve clearances on the above Briggs engine, but when I look under the rocker cover the only thing with a hex on it is the centre pivot of the rockers which needs to...

Valve adjustment intek 20 hp briggs [ 1 Answers ]

Valve adjustment instructions for a v-twin briggs intek engine. Popping out of carb and impossible to start, runs good after starting. Very frustrating and undependable. Good compression new plugs, coils, filter but after reading I believe the compression release related to valve adjustment may...

Briggs 18.5HP valve adjustment [ 1 Answers ]

How do I adjust the valves on my Intek OHV 18.5HP? The rocker adjustment doen't seem to work. Is it in the valve caps? Does it take Shims?


View more questions Search