Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Thermostat settings for dual zone heating-upper/lower
[ 4 Answers ]
I have 2 forced air gas heating sytems. 1 is in the basement and has a contoller on the first floor and the other is in the attic with a controller in one of the bedrooms on the second floor. I have been told that there is a offset (+/-? Degrees) in the settings between the 2 controllers...
York Heating system not working
[ 11 Answers ]
Hi, I have a York furnace (model P4USD16N10510A - natural gas) that stopped working this morning. Initially, I would hear the furnace fire, but the blower wouldn't spin. It had a loud hum to it, like it was stuck. I opened up the unit, and was able to spin the fins by had. This is while the...
Dual Thermostat system doesn't heat downstairs
[ 1 Answers ]
Hi, we have a single heater in the attic with two separate thermostats; one upstairs and one downstairs. When the house was new and the downstairs thermostat was selected to heat it seemed there was an 80% flow to the downstairs and appx. 20% flow upstairs. The system seemed to heat only the...
Thermostat replacement dual zone gas hot water system
[ 5 Answers ]
Hi all, first question here! I've spent an hour searching, learned a lot, but not a specific answer so I hope this isn't too common a question! One family ranch home with gas furnace, hot water baseboards, 40 year old Honeywell thermostats in main floor hall and basement main room. When... View more questions Search
|