Ask Experts Questions for FREE Help !
Ask
    kajunknight's Avatar
    kajunknight Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 31, 2009, 07:56 AM
    How to reset without turning it on
    My computer says windows is not installed an needs the installation disk but I do not have one any ideas what I can do many thanks?
    JBeaucaire's Avatar
    JBeaucaire Posts: 5,426, Reputation: 997
    Software Expert
     
    #2

    Jan 31, 2009, 08:01 AM

    The first step will be to locate an Installation disk. You can buy a new one or borrow someone else's disk and use the Authenticity code that came with your computer to reinstall.

    Most people don't realize the "authorization" comes from the code, not the disc. So if you can get your hands on a disk and have the "code" on your computer, you're ready to do an installation.

    Every computer in my house (5) have an authenticity sticker on it from Microsoft each listing their own unique installation code.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kohler 3 knob shower faucet keeps turning and turning on the hot water. [ 12 Answers ]

I have a 3 knob Kohler shower faucet in my bathroom. The hot water keeps turning and turning and doesn't stop. The water does turn on and off but it also keeps dripping. I have to play with it in order to prevent it from dripping as much as possible. How can I fix this? It is an older type Kohler...

My shower faucet keeps turning and turning. [ 4 Answers ]

Hi, my shower faucet has to be almost entirely turned around before it comes on. This just happened today. . Only the cold water.. is that a bad valve er something? Thank you in advance:(

How to fix sillcock valve that keeps turning and turning [ 5 Answers ]

Hi , I have searched high and low but can not seem to find anything related to my own problem. I have a sillcok valve that just can not be shut off and with winter coming I am starting to think I will need a plumber but wanted to try myself first. I removed the screw that holds the tap and...

Reset button keeps needing to be reset [ 2 Answers ]

The reset button on our oil furnace needs to be reset every 10 to 14 days. What can be the problem? We are leaving for the holidays and I'm concerned that we could come home to frozen pipes.

Fan reset [ 1 Answers ]

My condenser fan went out a couple of days ago. I prelaced the motor and the fan. I did not replace the capacitor. The motor will not turn unless I push the fan, then it runs, until the unit cuts off. I believe this was the original problem that caused the motor to burn out. What would cause the...


View more questions Search