Ask Experts Questions for FREE Help !
Ask
    NATALIE886's Avatar
    NATALIE886 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 29, 2009, 02:38 PM
    No hot water in the shower!
    When I turn on the water in the shower of my upstairs bathroom, it's either cold or just warm. I set it to the hottest setting and it's still only warm water that comes out. The water pressure is fine and there is hot water in the rest of the house. I remove the handle and found the brown ring on the pin and I moved it back a few notches and nothing. I found the valve inside the pipe and took it apart. It didn't look like there was any build up or blockage. How can I fix this problem without tearing apart my tile?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jan 29, 2009, 05:22 PM

    Is this a one handled shower valve, do you know the brand or model? Most likely we can help you and the wall will stay intact.
    NATALIE886's Avatar
    NATALIE886 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jan 30, 2009, 11:23 AM
    Quote Originally Posted by ballengerb1 View Post
    Is this a one handled shower valve, do you know the brand or model? Most likely we can help you and the wall will stay intact.
    Im not sure what brand it is, but yes it is the one handled shower valve. I will find out tonight and let you know, thanks!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

The water in my shower will not switch from the shower head to the tub spout? [ 5 Answers ]

I recently purchased a small home, that I am getting ready to rent out the problem is I get water from the shower head just fine, but I get not water from the tub spout, any ideas?

No Cold Water Pressure - Hot Water works Great.Shower [ 10 Answers ]

I live in a fairly old house. In my downstairs shower I get great hot water pressure, but no cold water pressure. I have two handles, one for cold and hot. Any suggestions on how I might fix the problem? House gets water from the city. Not sure on the make/brand of the faucets but they are...

My shower drain is raised above the shower pan by 3/16" causing standing water [ 2 Answers ]

I have a fiberglass shower stall where the bottom has either slumped or the stall was installed wrong to begin with (it has no support beneath the surface that I stand on). The drain sticks above the level line so I have about 3/16" of standing water. I cannot easily access the bottom from the...

Lose Hot Water in bottom Shower When Top Shower is being used ? [ 5 Answers ]

Hey guys, this problem has been occurring for some time now, I finally found this website to finally ask the question and hopefully have an answer :).. Now I do not want to call the plumber in at this point, in case if it's a easy fix and would rather save the money, so please if you can help...

Hot water in the shower until shower head installed [ 6 Answers ]

I have hot water in all my other faucets/showers. I also have hot water at the particular shower with the problem as long as a shower head is not installed. When I install the shower head, the water is lukewarm. Any ideas for the source of the problem, and how to fix?

View more questions Search