Ask Experts Questions for FREE Help !
Ask
    preachin1's Avatar
    preachin1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 29, 2009, 07:20 AM
    Broke furnace
    I have a goodman model gmpn080-4. the igniter lights the flame comes on after the preset time but after that it shuts down . The red indicator light stays on constantly and blinks no codes. Does any one have any suggestions?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 29, 2009, 09:56 AM
    Try cleaning the flame sensor.
    Attached Images
      
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

York Stellar Furnace Heating up Furnace Room to 110 Degress? [ 2 Answers ]

I have a York Stellar Furnace in my newly purchased house. Furnace is 15 years old. Furnace is releasing hot air from front grills and heats up furnace room to 110 Degrees. I had a Bryant Furnace in another house and this never happened. All plenams and ducts are taped and sealed so the heat is...

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...

G9T08012UPB13C Coleman furnace inducer wheel broke, just replace or is problem larger [ 18 Answers ]

My model # G9T08012UPB13C furnace inducer motor started making a horrible sound. I turned the unit off. I pulled the motor and opened the wheel housing to find the wheel was still attached to the motors spindle, but the edge of the wheel had been damaged and was scraping the side of the housing,...

Furnace ignites but blower won't start till furnace shuts down. [ 7 Answers ]

(Nordyne/Miller G3RA)-I have a furnace HSI(glow plug) that will ignite and burn until it gets too hot and shuts down. As soon as the furnace shuts down the blower starts to circulate air. The blower circulating air cools the furnace and it reignites.Shortly after the furnace ignites the blower...

Furnace not heating the house. Damper on the furnace not opening. Motor then shuts. [ 4 Answers ]

My forced-air furnace is not working correctly. The gas works heating the air in the furnace, but When the motor starts the damper doesn't open and the Motor shut down. I need suggestions?:mad:

View more questions Search