Ask Experts Questions for FREE Help !
Ask
    coach 23's Avatar
    coach 23 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 27, 2009, 08:36 AM
    Honeywell thermostat
    I have a Honeywell thermostat Chromothem IV plus. I have not had any problems with it , until now. For the last week, HOLD has been on the display. I have never had it stay on this long before. Is it telling me something or can I do something to remove it.

    Is this a way for the temperature to stay constant as opposed to the furnace not coming on until the temperature reaches a certain temp.

    Thanks, Rich
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Jan 27, 2009, 09:13 AM

    <Moved from Electrical & Lighting>
    dac122's Avatar
    dac122 Posts: 463, Reputation: 17
    Full Member
    		  
    #3

    Jan 27, 2009, 11:07 AM

    Hold is a mode on the thermostat that will keep a constant temp, instead of following a schedule to save on energy. Sounds like someone pressed the HOLD TEMP button and you need to press the RUN PROGRAM button, or at least that's what you do on Chromothem III
    coach 23's Avatar
    coach 23 Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Jan 27, 2009, 12:51 PM

    Thanks, I was able to download the manual for the thermostat and was able to figure it out. Thanks for answering my question. RIch
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changed over from White Rodgers Thermostat to Honeywell thermostat [ 3 Answers ]

I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I have changed over to a Honeywell programmable thermostat model RTH7400. Did all the correct wiring as stated in the books but when set to cool, the heater kicks on instead of the central air conditioning. What...

Replacement of Carrier Heat Pump Thermostat with Honeywell TH6000 series thermostat. [ 4 Answers ]

I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...

Changing over from White Rodgers Thermostat to Honeywell thermostat [ 3 Answers ]

I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I want to change over to a Honeywell programmable thermostat model RTH7400. I need help in trying to figure out the wiring part of this whole thing. Can someone out there please help. I would certainly appreciate...

How do I wire my new honeywell thermostat replacing the old tempstar thermostat? [ 1 Answers ]

I am replacing my old thermostat. The old is a TEMPSTAR, the new is a Honeywell model # RTH7500. When I use the directions I end up with one left over wire. We called the Honeywell hotline, the rep. said to wire it like this: red to R, white to O, Yellow to Y, Blue to C, Green to G, Orange...

Honeywell Chronotherm IV Plus Honeywell Thermostat, T8624D [ 1 Answers ]

Honeywell Deluxe Programmable Multistage Thermostat, #T8624D Chronotherm IV Plus I have 2 of above thermostats and have had for about 5 years. It takes no batteries and is directly connected to a 24 volt source. Have one upstairs and one downstairs. Have noticed at times that the LCD on...

View more questions Search