Heil unit again

bandb Posts: 15, Reputation: 2

New Member

Jan 26, 2009, 03:44 PM

Heil unit again

We changed the gas valve and rollout switch neither one of these made a difference changed the control board and now the inducer motor won't even come on how likely is it that the pressure switch is bad and caused this

Check out some similar questions!

Pleasy let me know how the capacity of a Air Handling unit or a Packaged unit is dete [ 1 Answers ]

Please let me know what factors should be measured to assertain the capacity of a AHU or a Packaged unit. What does it mean by on coil temperature and off coil temperature ?

Heil unit won't ignite [ 8 Answers ]

What is the most likely cause of this inducer motor comes on but unit won't ignite model #pgaa36d1k3

Heil unit not heating well. [ 3 Answers ]

First timer please bear with me, I have a Heil 3 ton unit outside my 1200 sq. ft. home. It was there when I moved in about 10 years ago. My heating bills have been steadily going up over the years, I figured that to natural gas prices mostly. Now there is only lukewarm air coming out of the...

Rheem-heat-pump-outside-unit-humming but blower unit working [ 3 Answers ]

I have a heat pump and ac unit outside. The inside blower fan still working but the outside unit humming. Are there any quick fixes here

Changed from separate cooling & heating unit to combined unit [ 1 Answers ]

I have a mobile home & when it was set up in 96 we had separate cooling & heating units run off one thermostat. We had a 3 ton ac unit & an electric furnace inside for heat. This past summer we bought a 4.5 ton ac & heating combined unit. We hooked up to wiring that old ac unit was hooked up to...

View more questions Search

Check out some similar questions!

Add your answer here.