Ask Experts Questions for FREE Help !
Ask
    cunoz's Avatar
    cunoz Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 26, 2009, 02:32 PM
    Pressure switch
    I just had a pressure switch installed yesterday and wundering if it comes factory set? And how do you adj it? I know the switch opens at 30 and closes at 50 but it stays at 50 for 30seconds and shuts down. I have a pumptrol from square d it has two adj nuts on it should I even try messing with it if so for my own info please explain how to adj. thanks: confused:
    21boat's Avatar
    21boat Posts: 2,441, Reputation: 212
    Ultra Member
    		  
    #2

    Jan 26, 2009, 05:18 PM

    Sorry for the double post
    I could type out the answer here but the site below covers it prety well.
    If you still have any more questions post back
    21boat's Avatar
    21boat Posts: 2,441, Reputation: 212
    Ultra Member
    		  
    #3

    Jan 26, 2009, 05:20 PM

    This should help you and explain in good detail
    Some come factory set Look inside the cover to see what its rated at usually its 20lb 40lb or 30lb 50lb

    How to adjust water pump pressure, pump cut-on pressure and pump cut-off pressure - private pump and well system do-it-yourself repairs



    Signed 21 Boat

    If I Helped To Answer Your Question Please Rate My Answer
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Adjusting pressure on Pumptrol Pressure Switch [ 9 Answers ]

Model #9013FSG2J21BP

Deep well, pressure tank/switch not building pressure [ 13 Answers ]

The only way I have water pressure is to leave the power on! I have replaced the 5 gallon pressure tank (28psi when void of water)/fittings/pressure gauge and tried 3 new 30/50 pressure switches and the problem remains the same. With the power off, the pressure drops to 0 (not 30). When I...

Goodman limit switch/pressure switch? [ 2 Answers ]

Hi, I've got a goodman furnace (mod. # GHT070-3) it's about 5 years old. Recently, the heat will only kick on for about 30 seconds then shut off. It's giving me 4 flashes: Open limit switch, then it kicks off. After that it gives me 3 flashes and turns back on (pressure switch). It seems the...

Pressure switch [ 2 Answers ]

The pressure switch on my Nordyne natural gas downflow furnace keeps going bad or failing to work, what could be causing this? :confused:

Limit Switch - Pressure Switch [ 0 Answers ]

Hello Folks, This weekend I've been playing with a heating system at my new apartment and I'm trying to figure out what the different componets do. I kind of followed the circuit but still have some missing links... 1-There are some terminals on the furnace's circuit board labeled LIMIT. The...

View more questions Search