Ask Experts Questions for FREE Help !
Ask
    harwaaah's Avatar
    harwaaah Posts: 11, Reputation: 1
    New Member
     
    #1

    Jan 25, 2009, 07:17 PM
    Repairing air infiltration near slab
    I recently discovered several areas in my home where cold air is infiltrating my home. The leak comes from under the wooden trim that runs along the floor on my exterior walls. I've pulled off the trim in these area found that there is a gap between the drywall and the concrete slab of my patio home. Can I simply fill this gap with spray from from the inside of my home or is there another method that I should take?

    Thanks for your help!
    Handyman2007's Avatar
    Handyman2007 Posts: 988, Reputation: 73
    Senior Member
     
    #2

    Jan 25, 2009, 07:52 PM

    How large is the gap? If you were to use the spray type foam, you have to be careful not to use too much because this product expands and may cause greater problems. My suggestion would be to use a silicon/latex caulk for exterior use.
    EPMiller's Avatar
    EPMiller Posts: 624, Reputation: 37
    Senior Member
     
    #3

    Jan 25, 2009, 07:55 PM

    Foam-in-a-can works fine if you know how. DAP makes one that is pretty easy to use. The polyisocyanurate ones can be real interesting. Especially if you don't READ AND FOLLOW THE INSTRUCTIONS. You will be replacing floor coverings, furniture, drapes, whatever, if you don't follow instructions. Plain old caulk works well, it just doesn't expand and insulate. I like DAP Dynaflex 230 for important sealing jobs.
    harwaaah's Avatar
    harwaaah Posts: 11, Reputation: 1
    New Member
     
    #4

    Jan 25, 2009, 08:35 PM
    Thanks, I will try the DAP. I assume I should wait until spring when temperatures are above 32F ?
    EPMiller's Avatar
    EPMiller Posts: 624, Reputation: 37
    Senior Member
     
    #5

    Jan 26, 2009, 07:10 PM
    Quote Originally Posted by harwaaah View Post
    Thanks, I will try the DAP. I assume I should wait until spring when temperatures are above 32F ?
    Yes, do it when it is warmer. Everything will work better then, both the caulk and you. Jamb something in the crack for now. A putty knife and long narrow strip of cloth would work. It also would be easy to remove later.

    EPM

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Connecting new concrete slab to old slab for an addition [ 1 Answers ]

I want to expand my master bed room/walk in closet to house. Need to puor new slb for addition and connect to the old slab.

Air infiltration, well, submersible pump, bladder tank [ 7 Answers ]

I have a shallow well with a submersible pump and a bladder pressure tank. Yesterday I noticed air coming out of the faucets, etc.. When I checked the plumbing around the pressure tank I could see the particle filter case was almost full of air. I have clear braided hose on both the feed to the...

Repairing Cracks in basement 7 inch slab, what is the best crack prevention. [ 1 Answers ]

Hello All, I have a 10x12' foot bathroom on the downstairs slab, there are some cracks that I don't want opening up that is going to crack the heated saltillo tiles that I'm going to lay down. I saw RED-GUARD at Home Depot and I know there are other crack prevention/stretch type of protection. ...

Pouring new Concrete slab over OLD basement slab [ 2 Answers ]

I have a house placed on its exsisting foundation and basement concrete floor in 1934. The floor is solid, uncracked, and level but has several areas that are very uneven. To the point, the basement is unusable for living space. Is it possible, and reasonable, to pour a new slab over the...

Leak under carpeted slab by bathroom door - does slab have to be ripped up? [ 2 Answers ]

Could the leak be caused from something else? There is no water on bathroom floor, but could it be the toilet seal? Or a clogged vent backing up water or sewer? Help, we don't have much money and need answers fast.


View more questions Search