Ask Experts Questions for FREE Help !
Ask
    kittekat's Avatar
    kittekat Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Jan 24, 2009, 02:45 PM
    Dishwasher handle replacement
    Hi, can anyone tell me if it is easy to replace the handle on my fridgidaire gallery series dishwasher. The handle just broke as I was trying to open the dishwasher. It was purchased in 2003. Any help would be appreciated.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 24, 2009, 05:42 PM
    Exact model number?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Amana microwave.door handle replacement. [ 2 Answers ]

I have an Amana MVH210E "over the stove" microwave. The handle has broken off and must be replaced. I can't figure out how to disassemble the door to gain access to the fasteners that screw into the handle. Can anyone out there offer a suggestion?

3 handle shower faucet replacement [ 2 Answers ]

I just purchased a three handle shower faucet to replace my older worn out three Handle shower faucet. The new faucet came with a new brass shower three way diverter to be installed. Is there any way to use my existing three way shower diverter that is in the wall from my old faucet and adaptor...

Shower handle replacement [ 1 Answers ]

I need to replace a valve for a shower. The handle mixes the hot and cold but I do not see a name on it. There are several numbers 062N1275 05 96 and it does say made in Canada. Also T = 11 and LM26691 Can you help me?

Unusual shower handle replacement [ 3 Answers ]

Hello everyone, I need some help! I just bought a house built in 1969 in which the previous owner merely updated the bathroom by putting new tile leaving all existing plumbing fixtures. The clear plastic handles that look original, have cracked and no longer turn the water on and off. I went to...

Shower handle replacement [ 3 Answers ]

I'm replacing my whole shower. There is a shower head and a handle. I've removed the handle and note a round copper stem with a flat bottom, sticking out from the center of the hot/cold connector. It is about 1/4" diameter. Is this a standard set up? Will any replacement valve fit on it or are...

View more questions Search