Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to bond Corian shelves to Corian shower walls?
[ 3 Answers ]
About 4 years ago, I had a Corian shower installed because I preferred it to tile/grout. I thought that the technology allowed for the (essentially) PERMANENT bonding of Corian to Corian so I had 3 small corner shelves installed to hold soap, shampoo, etc. Now, one shelf has fallen off, one is...
Plumbing adhesive
[ 6 Answers ]
Is there any easy way to loosen plumbing adhesive that may have been used to seat a the basin flange in a bathroom sink? I'm trying to completely replace the hardware on a bathroom sink and need to know how best to get the old flange out that is in the basin of the sink.
Qu about black adhesive
[ 2 Answers ]
Hello! I am a single mom, maintaining a house (yes, with a LOT of duct tape), and many questions. I am wanting to have vinyl flooring laid over an existing floor. I was told by a salesman that because my existing floor tile has black adhesive beneath it, I have a potential asbestos problem. ...
Tiling over adhesive
[ 2 Answers ]
I am remodeling my bathroom and want to put 12x12 ceramic tiles on the floor and walls. The plaster walls had old plastic tiles from the 50's. I removed the plastic tiles and now there is a layer of adhesive with trowel marks. For the most part it is fairly even, however, in some spots the... View more questions Search
|