Ask Experts Questions for FREE Help !
Ask
    ir7150's Avatar
    ir7150 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 19, 2009, 09:31 AM
    Dryer works. But doesn't heat properly/fast as it used to
    About 2 days ago my dryer (FrigidAir)is not heating properly or as it used to... takes double or trippe the time to heat a load of clothes... I have no knowledge about this subject... what should I check?
    StaticFX's Avatar
    StaticFX Posts: 943, Reputation: 74
    Senior Member
    		  
    #2

    Jan 19, 2009, 09:52 AM

    Check to make sure the lint trap is clear...
    Try sticking a vacuum in there to suck any lint out..
    Also check the exhaust.. make sure air is flowing good out of it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My dryer only works on low heat and not on high heat. [ 1 Answers ]

I have Whirlpool dryer model #TEDX640EQ1. The dryer does not produce any heat when on the high heat setting, but will get warm on the low heat setting. I need the high heat setting to work so that it doesn't take 2 cycles or more to properly dry my clothes. Anyone know what the problem could...

3 yr old heat pump, heat works, no cool [ 10 Answers ]

I have a heat pump that was 3 years old in May. We went to change from heating to cooling about a month ago. I noticed later that it wasn't cooling. Checked and found it had tripped the breaker. Reset and instantly threw the breaker again. Called a friend that does A/C work on the side. We...

Dryer only works on low heat [ 1 Answers ]

I have a Kenmore dryer that only produces heat when it is on the low heat cycle. Any other setting it spins with no heat. The model # is 110.60612990

Kenmore Dryer - No Heat - Everything else works [ 2 Answers ]

Model number 11063932101 - The element will not heat, but the drum will rotate, interior light comes on, etc. I have checked the two circuit breakers - OK! I have done a continuity check on the heater element, thermal cut-off, thermostat and thermal fuse. All pass the continuity check. Also, I...

Ceiling fan works properly only when light is on [ 3 Answers ]

I just installed a ceiling fan, and though the fan works great when the light is turned on, when the light is turned off, all power seems to be drained from the fan. I've tried to rewire, but no luck. And when the light and fan are on together, any small imbalance in the "fan" disappears. Does...

View more questions Search