 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Well- No Water
I have a well. Yesterday I woke up and had no water at all! I've checked for leaks, and such. My boyfriend had turned off the well pump to avoid it overworking. It has now been suggested I prime the pump, but I don't understand anything I read and need specifics. Please help... all I want is a shower.
|
||||
|
||||
|
To prime a pump, look on top of the impeller housing and find a threaded 1/4" hole with a plug. This could also gave a pressure gage installed in the threaded hole. No matter, turn the pump off at the breaker box and remove whatever's in there and fill the impeller housing with water until it runs out of the hole replace the plug or gage and turn the pump back on. If you can't fill the housing up to the top that would indicate a faulty check valve. Good luck and thank you for rating my answer, Tom
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Can anyone give me a reason as to why nearly completely cold water is coming out of my hot water tap in my bathroom but when I run the hot water tap in the kitchen the water is nearly boiling. The hot water and cold water taps are separate in the bathroom, where the kitchen has a handle which...
Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....
I have a 6 units 3 stories with daylight basement apartment. Build in 1960. Just bought it few months ago. Last year the previous owner had a bad flood in the daylight basement after long period of rain. They cleaned out the area, remodel it. Good for few months, last couple of weeks rain long...
View more questions Search
|
