Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to remove single valve handle - Delta Shower
[ 48 Answers ]
I've got the Seats & Springs to fix a leaky Delta Monitor 1400 Series faucet (and the water is turned off), and am stuck at the very beginning. The handle is a single lever, it appears that the Set Screw is missing. I've tried twisting the lever and pulling without success - not knowing which is...
Delta shower valve drip even after new ball and seats
[ 3 Answers ]
My delta shower single handle faucet has for quite sometime dripped when turned off--The valve is about 20 yrs old. I installed a new kit about 3 years ago due to a small drip (ball, seals and springs). Once the valve internals were replaced with a new ball, rubber seals and springs, and top...
Delta Shower Leaking
[ 2 Answers ]
I have a delta shower that is leaking. I tried adjusting the valve, and it seemed to help, but it started leaking again. I did some research and took the shower trim and such apart... I got down to the valve, and not really sure on how to remove it. I am assuming that you just turn it...
Delta handheld shower head
[ 1 Answers ]
I just installed a Delta shower massage head, and it has about half the water pressure of the old head I replaced. Is there any way to increase the water flow, like some kind of restricter in the hose or head?
Leaking diverter valve and shower head
[ 1 Answers ]
I have a leak in my tenants apt. (2 family house). I do not know when it started, found it when they moved out. Water was leaking continuously from the shower head... the diverter valve knob is missing and if you use a screwdriver, you can "divert" the leak from the shower head to the faucet. It... View more questions Search
|