How to wire

DARYLMISCHAL Posts: 2, Reputation: 1

New Member

Jan 11, 2009, 03:53 PM

How to wire

Two stats. Want to know how to wire to control board. Zone heating

hvac1000 Posts: 14,540, Reputation: 435

Heating & Air Conditioning Expert

Jan 11, 2009, 04:42 PM

Follow the directions that came with the zone panel or go to the manufactures web sire.

Add your answer here.

Check out some similar questions!

Can I splice off 1 wire to create 2 separate wire connections for 2 ceiling fans [ 10 Answers ]

I'm planning on installing 2 ceiling fan, 1 in each of 2 bedrooms. There's no electrical on the ceilings and need to come down from the attic. The attic has several different white plastic contained wires running throughout the attic. I'm wondering if I should splice from 2 separate sources, or...

How to wire 2 wire fan remote to 3 wire circuit? [ 10 Answers ]

I have a room that has 2 light switchs to the same light, so it is a 3 wire circuit. I bought a fan with a remote and the wall mounted remote has only 2 wires, how can I connect it? Thanks, Pete

Hard wire 3 wire to 4 wire 220 service [ 1 Answers ]

How do I hard wire my 3 wire (red,blk & bare copper wires) 220vac cooktop to the 4 wire (black/white stripe,black/red stripe, blk/blk & bare alum wires) in the house supply j-box ?

Hard wire 3 wire to 4 wire 220 service [ 2 Answers ]

How do I hard wire my 3 wire (red,blk & bare copper wires) 220vac cooktop to the 4 wire (black/white stripe,black/red stripe, blk/blk & bare alum wires) in the house supply j-box ?

3-wire home, 3-wire fan, 2-wire remote [ 9 Answers ]

Greetings, My home is 3-wire. I bought a Hunter ceiling fan (model 23811). The fan came with a remote assy. That I do NOT want to use... The fan has standard 3-wire connections (black, white, blk&white strip, ground). The remote receiver home-side wiring looks to be for 2-wire (blk and white)....