Ask Experts Questions for FREE Help !
Ask
    khs2216s2's Avatar
    khs2216s2 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 10, 2009, 03:12 PM
    Harbor Bay Light Kit IS LOOSE!
    The light kit on our Harbor Bay Ceiling Fan is loose. By loose, I mean it spins around and I am afraid it is going to come crashing down! Was it was made that way? If not, how to do I tighten it? Thx for ANY HELP!
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Jan 12, 2009, 10:11 PM

    It's not. What model fan is it?

    And, there should be a nut you can tighten somewhere inside the light assembly.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Harbor Breeze fan and light, light is not bright [ 5 Answers ]

We installed (actually my Dad installed) a new Harbor Breeze fan with light about 9 months ago. It's connected to a remote. The fan works great, but the light stopped working. I found it needed a new bulb and when installing the new bulb, the light is extremely dim when turned on. It doesn't...

Harbor breeze fan light [ 6 Answers ]

Hi, I had an electrician install my 2 Harbor breeze fans with remotes . They both worked great until yesterday. One of the remote fans the blades work in all modes but the light will not come on . Could the halogen light in it gone bad already in just a week. We cannot figure out how to take...

Harbor breeze light flicker [ 5 Answers ]

Hello I'm new here. Great site. Is there a way to access other answers? I have a new fan with remote that flickers. It seems many have had this problem How do I see the old answers before I waste people's time reiterating ?

Wiring Harbor Breeze (w/ light) where old room light was [ 3 Answers ]

I am a wiring in a Harbor Breeze Fan (w/ light) where the old ceiling light was: I have one bundle of white wires that had one wire going to the old fixture; A single white wire that also went to the old fixture; & a bundle of black wires that bypassed the old fixture. I have assessed that...

Harbor Bay fan/light speed [ 3 Answers ]

Hello- I just installed a Hampton Bay Minuet II celing fan w/ light. I would guess I followed all the instructions, however... when I pull the chain to turn off the light, the fan goes to half speed. This happens on all 3 speeds. Any ideas? Thanks, JIM Ps- Yes, I meant to type Hampton in the...

View more questions Search