Ask Experts Questions for FREE Help !
Ask
    km85's Avatar
    km85 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 6, 2009, 02:44 PM
    Dryer won't completely dry clothes
    Kenmore elite dryer about 5 years old will not completely dry clothes can it be the dryer heating element or thermostat
    pa46226's Avatar
    pa46226 Posts: 12, Reputation: 1
    New Member
    		  
    #2

    Jan 6, 2009, 03:10 PM

    It is probably the heating element. In the newer model they are usually located on the back of the unit. Take it off and you can take it to an appliance parts store and they can test it for you.

    Also your breaker may be tripped also for the dryer, that happened to me once we took the element off and took it in and it was okay. (the heating element if it isn't the problem they aren't returnable) Any way they told us to check the breaker and that is what is was.

    Since the breaker tripped it was running on 110 instead of 220
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dryer not Drying completely [ 2 Answers ]

I have a Frigidaire Crown Series FDEB23RGS1, I have replace the upper and lower felt, the heating element is still good, what else can be the problem?

Toilet won't flush completely [ 1 Answers ]

Hi, Im new to this site. I just noticed that my toilet stopped flushing completely and won't flush the toilet paper down. I removed the lid and noticed the tank is only filling up about 2/3 to 3/4 of the way to the water line. Why is it suddenly doing this? I hope its something simple that I...

Kenmore Elite won't dry completely [ 4 Answers ]

I have a Kenmore Elite eletric Dryer model #110.64962300. It's only a couple of years old. Everything seems to be working fine but the clothes will not get completely dry. I have taken apart the front kick plate and cleaned out the entire vent hose, and also cleaned out the vent hose leading to...

View more questions Search