Ask Experts Questions for FREE Help !
Ask
    jr0907's Avatar
    jr0907 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Jan 2, 2009, 12:34 PM
    Payne Gas Pack Furnace Heater And A/C Unit
    It's a Payne Gas Pack forced air furnace and A/C unit. At first the a/c functioned properly during the summer,now in winter the heat would'nt work. It's a unit that sit's on top of the roof in a apartment complex. First I thought it would be the tstat so I replaced it with a upgraded flux 400 series mercury low voltage tstat, that did'nt do it. Then I replaced the spark ignition module and gas valve and I also replaced the contacter and step down transformer. There is 120v going in to the transformer and 24v coming out to the ignition module,24v at the tstat. Nothing functions!
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    Jan 2, 2009, 04:45 PM

    Look at the electrical diagram for the unit and identify the safety devices (limit switches, draft safeguard switches, flame roll-out switches, etc.). Locate and check these for any that may require manual reset.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

New air conditioning unit - Payne [ 16 Answers ]

I live in a condo. All of the units in the building need to new air conditioners because they are all old are will not survive an inpending reroofing. The association got a bid for a company that will put in a new A/C unit for anyone who wants one - it is about $1500 installed. The estimate...

Payne forced air with cooling unit [ 4 Answers ]

It's a Payne Forced Air Furnace with Cooling Unit the product no. 585hjw024040abae, model no. 585hj054040, like I was asking in my previous question. It doesn't have a circuit board it has a contacter,step down transformer,relay,capasitor,run capasitor,spark ignition module,gas valve. I changed the...

Payne A/C and Heater [ 1 Answers ]

I'm working on a a/c and heat unit that sit's on top of the roof. Before I replaced the old mercury t-stat the a/c functioned properly but the heater did'nt. I replaced the t-stat with a LUX 400 series low voltage t-stat, I have replaced the contacter in the unit along with the step down...

Payne Gas Pack issue [ 1 Answers ]

When trying to heat, the pilot is not igniting. It runs outside but blows cold air out of the vent. Not getting anything out of the vents inside. AC works fine. Could this be something simple that I could fix myself? Anything I could do to diagnose the problem?

Heating - Payne unit [ 2 Answers ]

My less than 3 year old Payne central heat/air unit will not put out heat. It is 59 degrees in our house today, and we are freezing. No money to hire a repairman. Was wondering if there is anything I could do to check it out. Thanks

View more questions Search