Ask Experts Questions for FREE Help !
Ask
    kwad16's Avatar
    kwad16 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 31, 2008, 08:38 PM
    6.0 powerstroke
    I have the 6.0 powerstroke and it acts like its vapor locked and it smokes more than normally and I'm also losing water and I can't find a leak what is my problem?
    twins711's Avatar
    twins711 Posts: 5, Reputation: 1
    New Member
    		  
    #2

    May 25, 2009, 11:11 AM
    Truthfuly your problem is you bough a ford!! But seriously, your EGR cooler and oil cooler need replacing. Why do I know this! Because I have 20 out of 350 in my fleet and this is happening to everyone of them.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Powerstroke 7.3 diesel [ 2 Answers ]

I recently purchased a used 2001 ford 7.3 diesel. It has been a nightmare. First a new ckank position sensor and cleanning of the injectors. Broke down again. This time wiring at the valve covers. Both sides bad. Broke down again. This time three injectors bad. Dealer says 1800.00. To fix. Seems to...

Powerstroke 7.3 problems [ 2 Answers ]

I took my 2002 Ford F 250 7.3 Diesel to the dealer for the recall of the cam sensor, maybe coincidence but twice now I have parked the truck on a slight slope nose down and after only 10 to 20 minutes it wouldn't start? The way I got it to start last time I removed the fuel filter. It started...

6.0. Powerstroke Diesel [ 2 Answers ]

I have a question regarding a 2004 Powerstroke Diesel engine, I purchased this truck when it had 32,000 miles on it and it now has 125,000 miles and it hs really never ran just right. It has been in the shope serveral times for running rough and cold start issue, I have had some injectors changed...

Powerstroke won't start [ 4 Answers ]

I have a 2000 Ford F-350 with a powerstroke diesel that I can not get to start when cold, even at 68 degrees. I will leave the key on for a minute or two to make sure the glow plugs get good & hot but still doesn't help. At 68 degrees it tried to start, shook for a few seconds, then died. It never...

View more questions Search