Ask Experts Questions for FREE Help !
Ask
    Vancouver202's Avatar
    Vancouver202 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 31, 2008, 12:59 PM
    Moen shower diverter
    When I pull the rod up now, virtually no water goes to the shower head, this is so simple, the metal rod and the plastic piece it is attahced to, what can have gone wrong with it?
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #2

    Dec 31, 2008, 08:28 PM

    It is a simple matter of the plastic not sealing where is meets the metal and does not send the water up to the shower head. I suggest that you buy a new tub spoud just like the one that you have and replace the old one.

    It is a fairly simple job to undertake.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Repair shower diverter valve of Moen Monticello spout [ 5 Answers ]

The shower diverter valve in the spout of my Moen Moentrol Single-Handle Tub/Shower spout has recently started leaking; i.e. when the shower is turned on, water now comes out of both the tub spout and the shower. This unit was an original installation in about 1999. I note that it has a slot on...

Moen shower faucet diverter [ 4 Answers ]

The diverter on our Moen showertrol single handle faucet does not pop in and out as it should--I have tried to grease it but to no avail. Should the diverter be replaced and if so how? Thank you.

Moen Single Handle Shower Diverter Leak [ 1 Answers ]

I have a Moen single handle valve in my bathtub. The tub spout has a diverter on the top to change it to shower mode. Recently I tightened the screws on the cover plate where the handle attaches to eliminate slack which was causing the tub spout to move (and pull caulk away) each time the shower...

Cannot remove Moen tub shower diverter [ 1 Answers ]

I have a 3-handle moen tub/shower faucet. The center handle(diverter) froze up and will not turn. I ordered a replacement(part #94543) thinking it would give a clue as to how to remove the old one. I guess its corroded in place around the brass area of the cartridge. Any tips on removing the...

Moen diverter [ 1 Answers ]

How do I replace a diverter on a Moen f87420 kitchen faucet?

View more questions Search