Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Coleman furnace relay fan
[ 4 Answers ]
COLEMAN FURNACE 3100B seiries fan relay " RBM type 184" went bad and was removed from furnace without noting the wiring. Now have new relay but have no idea which color wire goes to which post. Have colored wires and numbers on post. Any help would be appreciated.
Fan relay for coleman electric furnace
[ 2 Answers ]
Hello, I was hoping you could help me locate where the fan relay is located on my coleman electric furnace? Serial #069076324 Model#3500A811. I have the problem figure out, I just don't have the knowledge to read the schematics.
Add a fan only relay to my Heil LP furnace
[ 3 Answers ]
I am adding an hydronic heat coil to my heil high efficiency furnace. I'm installing a 24volt relay wich I already have. I need to know how to wire this up. The furnace is a 1995 model. My objective is to run the fan on thermostat switch,and keep the LP heat for a back-up. Thanks
Furnace relay switch
[ 13 Answers ]
After duct cleaning my furnace (heat and air) does not work anymore. The thermostat indicates the system is on. Furnace light is on but the fan is not turning. There is that switch that you press when you open the door to the furnace. I guess is a relay swtich. On when door is closed and off when...
Faulty Relay in Furnace
[ 2 Answers ]
Hi everyone. My Concord two zone oil fired forced hot air furnace decided to stop coming on the other day. It has a Honeywell EMM-3 zone controller, a relay and a transformer. I had my oil dealer come and look at it, it was working for him. After he left, it stopped again. I took matters into my... View more questions Search
|