Ask Experts Questions for FREE Help !
Ask
    jaime71037's Avatar
    jaime71037 Posts: 0, Reputation: 1
    New Member
    		  
    #1

    Dec 23, 2008, 01:19 PM
    Charges against Illonois Governor
    What is Blago in the case against the Illonois governor
    JudyKayTee's Avatar
    JudyKayTee Posts: 46,503, Reputation: 4600
    Uber Member
    		  
    #2

    Dec 23, 2008, 01:22 PM
    Quote Originally Posted by jaime71037 View Post
    What is Blago in the case against the Illonois governor


    Blago is the nickname of the Governor, Blagojevich. Is that what you are asking?
    magprob's Avatar
    magprob Posts: 1,877, Reputation: 300
    Ultra Member
    		  
    #3

    Dec 23, 2008, 01:36 PM

    Actually, a Blago is a lot like a regular Blog but you go there to submitt a bid on the job you want.
    I went to the Blago and bid $7500.00 to be the Pope for 1 year.
    I also bid $5000.00 to be the President of Africa for an undetermined term or until assassination.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

JX-75 Governor - mecchanical or electrical? [ 1 Answers ]

How does the governor work on a John Deere JX-75 walk behind mower with Kawasaki engine? It was working fine for the last 4 years and suddenly the engine speed revs high enough with the throttle and stays at a constant level, but when going into heavy grass, the engine slows way down and does not...

8 hp B&S Governor and carb adjustments [ 3 Answers ]

I have an 8hp B&S engine Model: 190432, Type: 6117-01, Code: 92093010. It is installed on a White chipper/shredder. It starts on the first pull every time (with choke closed). It runs smoothly until I try to open the choke, then begins to stall. If I close the choke it picks back up and sometimes...

Governor and choke b&s 9 hp [ 1 Answers ]

I have a 9 hp b&s that will only run with the choke on full. Also need to know how to adjust governor

Governor [ 1 Answers ]

Hi, well I am still working on the 16hp briggs engine.. got everything redone but can't get the cover on where the governor is attached.. is there a trick to getting it on, does the inside piece have to be in a certain position. When I slide the cover into place it lockes up the adjuster on top of...

View more questions Search