Not your question?
  Ask your question
  View similar questions
   
  
 Add your answer here.Check out some similar questions!
Carrier 58MSA, code 34, flame proving sensor?
 [ 7 Answers ]
 Wanted to know if anyone could help me troubleshoot this problem.. This furnace will not fire up, basically what happens is the igniter lights up, but will shut down after a 5 seconds or so. It will do this three times until it goes into lock down mode for three hours, and then flashes code 34.... 
Civic code 9 (CYP) Sensor Error
 [ 8 Answers ]
 Hi I have a problem with my honda civic... Its popping out code 9 which is the cylinder position sensor (CYP)... I bought a new distributor for it but is still popping out the error code... was told I might need to replace wiring... so I was woundering if I change the engine harness will it be... 
Carrier 8000 Error Code 21
 [ 9 Answers ]
 Hello all, I have read through many post but can not find info on an error code 21. Any idea which direction I need to go with fixing this unit? Unit says 21 is a Gas Heating Lockout or Stuck gas valve relay. Does this mean I need to get a hammer and tap on that thing to unstick it? :D Any Help... 
Carrier error code '33'-Part 2
 [ 1 Answers ]
 
Another question regarding error code '33'. HVAC1000, you mentioned model,. I have Carrier WeatherMaker model 58SXC. Any difference of opinion as to why/what error code 33 is. Does this narrow it down for A more specific answer? You previously suggested the following. a) filter- replaced. ... View more questions Search 
  |