 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
What is the best way to refinish a wood side table. I once tried that environmentalorange stuff and I really thought it was a pain. It was very messy. Also the table has some scratches. I am unsure of the type of wood of this table. I would appreciate any input from someone with experience.
My house is sided with painted 4x8 plywood panels which are vertically grooved at 4" intervals. The paint within these grooves is badly cracked and needs to be seriously scraped and cleaned before repainting. I have two ideas. The first to find a router bit of the size of the grooves - about 3/8...
Basic question is regarding proper placement of insulation and vapor barrier. The contractor nailed a vinyl backed batted insulation to the concrete walls. Should I leave that up and put PT studded wall up with unback insulation between studs and then cover with a vapor barrier or take the...
I am getting ready to refinish some stairs. I was planning on using polyurathane. I have been told that the water based version is better. Any thoughts? What are the pros and cons of both.
View more questions Search
|
