Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Bryant Furnace Plus 80
[ 2 Answers ]
Hi Experts, Can you guys please give me hand? Here's my problem, I have Bryant Furnace Plus 80, it's about 8yrs old. It worked so great until last week, the digital thermostat went dead, it didn't show any numbers on the screen, I thought maybe it's dead, so I went to the store and bought a new...
Bryant furnace flame won't stay lit after a few minutes
[ 8 Answers ]
I have a Bryant Plus 80 model 395C that is 17 years old. I turned the furnace on this weekend and it starts up just fine. The draft blower starts, the igniter glows, the valve opens and it lights the burners. After it heats up the blower comes on as always. After about 3-5 minutes the burner goes...
Pilot won't stay lit on Bryant 394GAD036100
[ 1 Answers ]
I have a Bryant model 394GAD036100 furnace, no air. The pilot light will light but will not stay lit when turned to "ON" position on gas valve. Unit is at least 15 years old, with a thermocouple, no wires. The pilot light seems small after releasing knob to be able to rotate to on position
Bryant-burners won't stay on.
[ 1 Answers ]
I have a Bryant Model 397H. Have had an intermitent problem for the past 3 years. Furnace starts normally, burners come on and in about 5 seconds go off. This can repeat two to three times before remaining on and running normally. I have had two repairmen out to look at it and both times it would... View more questions Search
|