Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring codes from old Carrier thermostat to new Hunter thermostat
[ 1 Answers ]
WIRING CODE HELP FOR THERMOSTAT I am in an office and have an old Carrier programmable thermostat which no longer works. I purchased a Hunter 44660 thermostat to replace. My problem is that the wiring codes on the previous thermostat do not match up the codes on the new thermostat. Codes and...
Thermostat Wiring - From Two to One Thermostat
[ 4 Answers ]
Currently my central a/c unit is hooked up to a Honeywell CT3500 Programmable Thermostat. I've noticed that the thermostat can handle heat as well as cooling. My furnace is hooked-up to an older manual thermostat. It is a simple 2 wire set-up - red & white. Could the furnace be hooked-up to the...
Wiring direction for a multi wiring system thermostat!
[ 3 Answers ]
I have a 2 wire system (3 phase), need to connect multi wiring system thermostat! Need to know if, its correct to just use line#1, and the device already has a jumper?
Honeywell wiring different from old thermostat wiring
[ 2 Answers ]
I purchased a non-programmable digital thermostat to replace an analog thermostat with wiring red, white yellow and black. How do I match the wiring? HELP!!
New Thermostat Wiring
[ 3 Answers ]
Hi everyone. I currently have a hunter thermostat that's digital but am replacing it with a newer honeywell rth5100b. Here's my question: The old thermostat has the standard 4 R G W Y terminals with their respective wires connected to them. However, there is a 5th wire ( blue in this case)... View more questions Search
|