Ask Experts Questions for FREE Help !
Ask
    philipnguyen's Avatar
    philipnguyen Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 9, 2008, 04:14 AM
    VisionPro TH8000
    Helo everyone

    Please help me with wiring system.

    I have honeywell thermostat th8000 and furnaces and heat pump

    My furnace have
    R
    Y
    G
    W
    C

    Heat pump have
    R
    C
    W2
    Y
    O

    Please help me to connect all Furnaces , heat pump and thermostat together

    Thanks alots
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Dec 9, 2008, 04:29 AM

    The th8000 is a series ans not the full model number. What is the full model number?

    Do you have 2 systems?

    One Heatpump and one furnace?

    Unless this is duel fuel/hybrid, you will need two thermostats.

    Is this a heat pump combined with a conventional furnace?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring honeywell thermostat, round to visionpro. [ 13 Answers ]

Replacing an old round honeywell T-stat (T87F1917?)with a VisionPro 8000 model TH8321U1006. The unit it runs is a 20 ye old GE gas furnace with A/C. Old wires are B,G,O,R,W,Y. For what it's worth, all wire colors match the marking. I assume R,W,Y,G just swap over, but am not sure what the O,B...

Programming Honeywell VisionPRO TH8000 thermostat [ 1 Answers ]

How do I go about entering the temperature for my backup heat source (in my case, gas) to kick in? I believe it was set at 35 degrees, but I want to confirm. Thank you

Urgent: How to wire VisionPro TH8320? [ 2 Answers ]

I recently bought a new thermostat from Honeywell, model VisionPro TH8320. I'm replacing the old thermostat MapleChase 9620 (now Robertshaw 9620). The old one was working correctly. It has 7 wires. I believe I figured how to wire 5 of them, but not sure about the remaining two. I tried different...

Honeywell VisionPRO 8000 Installation [ 5 Answers ]

Hi Everyone! We just finished building our new home and didn't think about thermostats along the way. There is a simple digital thermostat installed at this time but we wanted a programmable one. I attempted to install it today but the compressor wouldn't cut on. I've installed thermostats before...

Wiring for VisionPro TH8320U 2H/1C [ 2 Answers ]

I currently have a York heat pump with a Janitrol gas furnace. Electromechanical 2H/1C with aux heat X=Black R=Red W=White Y=Yellow G=Green O=Orange B=Blue Honeywell VisionPRO TH8320U

View more questions Search