Ask Experts Questions for FREE Help !
Ask
    Blick's Avatar
    Blick Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Dec 4, 2008, 03:03 PM
    Remote Reset Button
    Our church gym has a large gas overhead heater that requires a reset every once in a while. Of course, the button is on the top of the heater, which means a trip up a fourteen foot ladder each time it needs resetting.

    Would it be possible to wire a reset button in a reachable location?
    KScontractor's Avatar
    KScontractor Posts: 9, Reputation: 0
    New Member
    		  
    #2

    Dec 4, 2008, 09:38 PM

    No this limit trips when the flue gases don't vent. Try extending the flue on the roof a couple of feet this usually solves this problem. The unit is a natural draft type furnace the flue pipe has to heat up before it will draft.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Reset button [ 1 Answers ]

I was replacing the front cover and touched a wire and got a spark then the air or heater fan would not work the unit is a carrier without a pilot light it has the glow light I am trying to find the reset button please help

GFI reset button continues to pop out. [ 1 Answers ]

I have an outlet that has a GFI. In the past the GFI would trip on a regular basis and I would have to push the reset button back in. Now the reset button will not go back in. Do I need to replace the GFI outlet and what was the cause of the constant tripping?

Why does a reset button keep popping out? [ 3 Answers ]

None of the wall outlets in the garage work unless I push in the reset button at one outlet. But it only stays pushed in for a few minutes. A refrigerator is the only thing plugged in to an outlet in the garage. What's happening?

Reset Button on Dryer [ 2 Answers ]

I purchased my dryer a little over a year ago. I problems with my electric one morning and come to find out there of a limb on a tree in the neighbor's back yard rubbing against the electirc cable running to my house. Everything else in my house is in good working order, but my dryer has not...

Reset button keeps needing to be reset [ 2 Answers ]

The reset button on our oil furnace needs to be reset every 10 to 14 days. What can be the problem? We are leaving for the holidays and I'm concerned that we could come home to frozen pipes.

View more questions Search