Ask Experts Questions for FREE Help !
Ask
    kevintash's Avatar
    kevintash Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 3, 2008, 12:14 PM
    Gas hot water heater
    I am installing a new gas hot water tank. I have been asked by the gas company to provide them my line pressure requirement. I haven't found that on any water tank literature. It is a standard 50 gallon tank. Any help?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #2

    Dec 3, 2008, 12:35 PM

    You might not recognize the unit of ____" W.C. or inches of a column of water.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

New hot water heater installed, but no hot water pressure. Plenty of cold water? [ 11 Answers ]

Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....

Need help deciding between a tank or tankless water heater [ 19 Answers ]

Which one saves me money; the tankless water heater or conventional tank water heater? :confused:

Very low water pressue to house after replacing leaking valve on water heater [ 1 Answers ]

I replaced the leaking valve leading to the hot water heater, drained the hot water heater, turned the main valve to the house back on and now have very low water pressure to the house (cold and hot) The house has galvanized metal pipes... HELP please!:confused:

Water heater hookup with sidearm supplimental heater [ 0 Answers ]

Hello: I'm hooking up a sidearm heater to an existing electric water heater for use with an outdoor wood furnace. I've seen diagrams showing the upper port of the potable water side hooked up to the anode port, the TPV port, and the cold water inlet port. My initial thought is that plumbing it into...

Connecting a tankless water heater and separate hot water heater [ 6 Answers ]

What I have is this. An oil fired boiler that generates hot water for my house baseboard heating system. Contained within the boiler is a tankless heater that is heated by way of the firebox in the boiler. The tankless heater is used only for domestic hot water. It has a separate CW supply to the...


View more questions Search