Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installing faux paneling and chair rail up a staircase
[ 4 Answers ]
I have installed chair rail and faux paneling in my foyer. So far it looks great, but now I want to continue up the stairs. I have determined that the first outside miters for the top left corner will each be 22.5* cuts. Subsequently, the opposing corner will also be the same degree cuts. But what...
2 questions about installing laminate on the staircase
[ 1 Answers ]
I've installed the laminate flooring in my basement by myself. Now comes to the stair part. I have some questions that I want to get the answer before I start the work. 1. How should I connect the stair nose and the laminate plank? Should I put the stair nose on the tongue to get a flush smooth...
In A Spiral Of Confusion
[ 1 Answers ]
Hey guys my name is Andy, I'm 23 from England, and here is my story, basically I had been going out with this girl for two years, it went great but we split for a month in the first year because I talked to another girl online, and my head was all over the place, luckily I didn't see that girl and...
New Fluorescent Bulb (the small spiral twisting tube type)
[ 3 Answers ]
After purchasing and then installing three (3) of those new fluorescent bulbs to replace some of my incandescent bulbs, I have some questions. 1. I hear a low volume “humming” in 2 of the 3 bulbs. One is louder than the other, but there is one as quiet as a sleeping baby. Is that noise...
Spiral Fluorescent lamp
[ 1 Answers ]
I installed a Hampton Bay Outdoor Wall-mounted lamp with motion-sensor. The installation comes with a 100 watt incandescent lamp. The fixture works as described. I replaced the incandescent lamp with a 23 watt spiral fluorescent lamp (100 watt incand. eq.). It works as described except when it... View more questions Search
|