Ask Experts Questions for FREE Help !
Ask
    juliekay1966's Avatar
    juliekay1966 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 2, 2008, 05:43 AM
    Furnace won't kick on
    What does it mean with the light indicate that (reversed 115 vac polarity
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 2, 2008, 06:24 AM
    The line (black)and neutral (white) are reversed on the power supplied to the unit.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My intertherm furnace pilot lights but furnace won't kick on [ 5 Answers ]

I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...

Furnace won't kick on [ 1 Answers ]

My pilot light is lit on my furnace but the furnace won't kick on. I changed the thermostat and it did fire up but after running a short while it started to blow only cold air. Can anyone tell me what could possibly be wrong?

Heat won't kick on [ 8 Answers ]

My a/c and fan is working fine. The heat will not kick on. The compressor comes on and we have checked all the breakers. We were told to push a reset switch, but cannot locate one! The fan also comes on while on heat setting, and fan "ON" but blows cold air. It also won't kick on when fan is on...

My Furnace won't kick on even after I've manually primed it 10 times [ 1 Answers ]

I need to know why I can't seem to keep the furnace running I prime it it stays on for 2 minutes then shuts down even before the blower starts . What's up with the red light near the reset button

View more questions Search