Ask Experts Questions for FREE Help !
Ask
    LLANKFORD's Avatar
    LLANKFORD Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 20, 2008, 11:01 AM
    Heater filter
    I have a Coleman 7900 series gas furnace and need to replace the filter..
    Could you please tell me where I can purchase one?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 20, 2008, 01:58 PM
    Is this in a mobile home? If it is go here to buy a filter. You can post to the list under Coleman and they will tell you which one you need and how to make your purchase. Those filters can be difficult to find.


    mobilehomerepair.com :: Index
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #3

    Nov 20, 2008, 05:14 PM

    Does the filter you are re-placing have the size written on it?, if not get out the old ruler and measure
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Nov 20, 2008, 09:38 PM
    The filter is a piece of 1/4 to 3/8 inch foam style. The stuff they sell at the stores is always to short to cover the opening so you have to get one from a mobile home place. They are washable and last a long time if not torn.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hotwater heater keeps needing breaker on the heater reset? [ 6 Answers ]

Hotwater heater keeps needing breaker on the heater reset? About every 4 or 5 days I have to go hit the red button on the heater and reset it. Its electric. Its only 2 years old and nevr has any problems so far. What gives?? TIA

How do I change filter on BDP day & night heater? [ 1 Answers ]

I moved into a new house and can't see where the filter goes on the heater. There is a Honeywell Air Cleaner next to the heater. Any suggestions?

Pump won't lite after cleaning filter and inner filter [ 1 Answers ]

Filter was complet mush and guk, also in the pump I took out and cleaned the screen , all good now, I primed filter and pump but still would not ignite. Blnk blk blk, after 3 second hold button furnace attempts then must hold for 30 secs to reset from lockout. SO after many attemps, "does it every...

Wall heater pilot light lit, but cuts off when I turn heater on [ 6 Answers ]

I have a wall heater, the pilot light was out so I re-lit it a couple days ago and it went on.. about 4 hours later I noticed it was out again... same thing off and on for three days... this time I lit the pilot and turned the heater on it immeditly made a click sond and went out completely... it...

View more questions Search